MSC Safety Training

MSC Safety Solutions offers a wide range of safety training classes designed to achieve and maintain a well informed work force.

View Training Calendar

 

MSC Safety Training Classes

MSC Safety Solutions offers a wide range of safety training classes designed to achieve and maintain a well informed work force from top management to field personnel. Properly trained employees help to ensure an injury free workplace and OSHA compliance. Our current list of available courses is shown below. Other courses for specific subjects or work tasks that may not be listed here are available as well. Please contact MSC Safety Solutions if you have any questions, or wish to request a special class for your company.

“I recently attended the MSC Safety OSHA 30 training and had a wonderful experience. James was our instructor and really found so many ways too keep the entire class engaged. His knowledge and experience shined through in his methods of teaching. I learned so much from this class that will stay with me not only in my professional life but personally as well. Safety is very much overlooked and he made me think about safety differently.”

— Lina Rose Valentine

Our Training Courses

Construction Safety Training

We offer construction safety training including, the fall protection planning, OSHA 10 and OSHA 30 training, confined space rescue and more.

  • Aerial/Scissor Lift (Course ID- CO-201)
  • Asbestos Awareness Class IV (Course ID- CO-202)
  • CDOT Flagger – (Course ID- CO-235)
  • Confined Space (Construction) (Course ID- CO-204)
  • Confined Space Rescue (Course ID- CO-220)
  • Crane Safety Awareness (Course ID- CO-221)
  • Equipment Operator – (Course ID- CO-235)
  • Fall Protection Awareness (4 Hour) (Course ID- CO-205)
  • Fall Protection Supervisor (8 Hour) (Course ID- CO-206)
  • Fall Protection Competent Person (24 Hour) (Course ID- CO-207)
  • Fall Rescue / Post Fall Recovery- (Course ID- CO-242)
  • Forklift operator – (Course ID- CO-215)
  • Hazard Communication (Course ID- CO-216)
  • Injury & Illness Record Keeping (OSHA form 300,300A and 301) (Course ID- CO-209)
  • Lead Awareness (Course ID- CO-218)
  • Lockout / Tag Out (Course ID- CO-233)
  • Managing Safety (4 Hour) (Course ID- CO-210)
  • Managing Safety (4 Hour) (Course ID- CO-210)
  • OSHA 10 Construction(Course ID- CO-226)
  • OSHA 30 Construction (Course ID- CO-227)
  • Respiratory Protection Training(Course ID- CO-229)
  • Scaffold Competent Person (Course ID- CO-212)
  • Scaffold Erector / User (Course ID- CO-230)
  • Steel Erection for the Safety / Supervisor Professional
  • Subpart CC for Managers (Course ID- CO-213)
  • Subpart R (Steel Erection) (Course ID- CO-231)
  • Surviving an OSHA Inspection (Course ID- CO-208)
  • Swing Stage Scaffold- (Course ID- CO-234)
  • Train the Trainer Aerial Lift (Course ID- CO-239)
  • Train the Trainer Forklift (Course ID- CO-238)
  • Trenching and Excavation
  • 1st Aid /CPR /AED (AHA) (Course ID- CO-203)
  • 40 Hour Hazwoper Training (Course ID- CO-215)

Learn More About Our Construction Safety Training Courses »

General Industry Safety Training

Our general industry safety training courses will prepare you for an OSHA inspection, record keeping, hazard communication, laboratory safety & more.

  • Confined Space General Industry (Course ID- GI-303)
  • Confined Space Rescue General Industry (Course ID- GI-304)
  • Forklift operator General Industry – (Course ID- GI-306)
  • Hazard Communication General Industry (Course ID- GI-311)
  • Injury & Illness Record Keeping General Industry (Course ID- GI-308) (OSHA form 300,300A and 301)
  • Laboratory Safety General Industry (Course ID- CO-307)
  • Lockout / Tag Out General Industry (Course ID- CO-305)
  • OSHA 10 General Industry (Course ID- CO-301)
  • OSHA 30 General Industry (Course ID- CO-302)
  • Surviving an OSHA Inspection General Industry (Course ID- GI-309)

Learn More About Our General Industry Safety Training Courses »

Oil and Gas Safety Training

Providing oil and gas safety training since 1990. Offering courses on hydrogen sulfide awareness and PEC and Safeland basic.

  • H2S Training (Course ID- OG-103)
  • Safeland Basic (Course ID- OG-101)

Learn More About Our Oil and Gas Safety Training Courses »

Crane & Rigging Training

We offer crane and rigging training courses intended to meet OSHA and NCCCO requirements so you can get your crane operator certification.

Crane & Rigging Training »

NCCER Training and Certification

Offering NCCER training and certification for structural ironworkers, rigging, signal persons, safety professionals, crew leaders and project supervisors

NCCER Training and Certification »

Onsite Training

If you would like to arrange for a training class at your facility, please contact any one of us. 
Class schedules are dependent on minimum attendant requirements. If training at your location is desired, room, travel, expenses, and other fees may be applied. Cost may be adjusted considering travel and related expenses, customization of class and learning materials, field work, supplies, number of participants, classes provided outside of normal business hours, and other factors. Discounts are available for large groups and for MSC Safety Solutions Service Agreement clients. Courses can be created or modified to fit the client’s needs. If you would like to register for a course, or have questions about our training courses, please contact us at (303) 477-1044, or E-mail us at [email protected].

Onsite Training »

General Information

  • Class schedules are dependent on minimum attendant requirement.
  • All classes will be held at our Training Facility at 4020 Kodiak Court, Frederick, CO unless they are requested to be held at a different location by the client.  If another location is desired, room, travel, expenses, and other fees may be applied.
  • Cost may be adjusted considering travel and related expenses, customization of class and learning materials, field work, supplies, number of participants, classes provided outside of normal business hours, and other factors.
  • Discounts are available for large groups and for MSC Safety Solutions Service Agreement clients.
  • Courses can be created or modified to fit the client’s needs IF feasible.

We accept credit cards and do not charge an additional credit card processing fee but, all refunded credit card payments will be charged the actual cost MSC Safety Solutions/Colorado Crane Operator School pays for credit processing.

If you would like to register for a course, or have any questions about our training courses, please contact us at (303) 477-1044, or E-mail us at [email protected]

View Training Calendar Contact Us